Instructions and Safety documents relevant to staff, students and researchers in the Analytical Centre:

•   Working After Hours
•   Biosafety
•   Storage and Use of Hazardous Substances
•   Handling Radioactive substances or Ionising Radiation Apparatus
•   UNSW OHS Policy
•   UNSW OHS Policy Statement
•   Managing Hazardous Waste
•   Risk Assessment - Required for Any Activity Listed in the Centre's Hazard and Risk Register
•   Fume Cupboards in Bldg F10: Basic Operating Instructions and Additional Information
•   Using the Service Lifts in Bldg F10 to Transport Gas Cylinders or Chemicals: Procedure and Risk Assessment.
•   Understanding the operation of the Gas Panels in Bldg F10.
•   Checklist for purchase of equipment in the Centre.

Risk assessments, induction forms, and standard operating procedures specific to the Analytical Centre are listed below.

BMSF Risk Assessments and Safe Work Procedures:

•   SWP for Routine sample analysis using ABI Voyager-DE STR and RA.
•   SWP for Routine sample analysis using LCQ Deca XP Plus - LC/MS or nanospray and RA.
•   SWP for Routine sample analysis using ABI QStar - LC/MS or nanospray and RA.
•   SWP for Gradiflow MF10 and RA.
•   SWP for Gradiflow BF200 and RA.
•   SWP for Routine sample analysis using Agilent 6890-5973 GCMS and RA.
•   SWP for Routine sample analysis using Agilent 1100 LC/MS and RA.
•   SWP for 2-Dimensional Electrophoresis (Using Immobiline Gradient Strips) and RA.
•   SWP for Fixing and staining of cells.
•   SWP for Routine sample analysis for peptides using TSQB and 1100 LC/MS and RA.
•   RA for Column change or cut on 5973 & 5973N GC-MS.
•   RA for Separation of proteins via IEF and followed by SDS PAGE.
•   RA for Dispensing Human Plasma.
•   RA for Hydrolysis of Plasma Proteins.
•   RA for Denaturing plasma.

BMSF Induction Forms:

•   Induction Checklist for Contractors
•   Induction Checklist for New Students
•   Induction Checklist for Visitors
•   Induction Checklist for Work Experience Students
•   Student Contact Information Form
•   Visitor Contact Information Form

SSEAU Risk Assessments and Safe Work Procedures:

•   XRD Lab: SWP for Operation of the XPert Pro MPD.
•   Surface Analysis Lab: SWP for Operation of the ESCALAB 220i-XL (XPS).
•   ICP Lab: SWP for Operation of the DuoPUR Sub-boiling Distillation Unit.
•   ICP Lab: SWP for Operation of the Retsch Mixer Mill MM301 ( Grinder).
•   ICP Lab: SWP for Operation of Sigma Centrifuge 3-16.
•   ICP Lab: SWP for Operation of Varian Vista AX ICP-AES and RA
•   ICP Lab: RA for ICP Sample preparation.
•   ICP Lab: SWP for Operation of Perkin Elmer Elan 6100 ICP-MS and RA.
•   ICP Lab: SWP for Operation of Perkin Elmer OPTIMA 300DV ICP-OES and RA.
•   ICP Lab: SWP for SWP05.11 Microwave Digestion and RA.
•   ICP Lab: SWP for Handling of Hydrofluoric Acid.

EMU Risk Assessments and Safe Work Procedures:

•   Risk Assessment for critical point drying and sputter coating of biological specimens for SEM.